2011 Price List and Ordering Information

To order products from EME Systems:
Please fax, email or call in the order to us. We accept qualified purchase orders, and we accept payment by check, wire, or credit card  (Visa, Mastercard, American Express.   Shipping charges dependent on destination and level of service.  Most convenient is UPS.   Additional fees (~$40) apply for export paperwork and handling.  

mailto:orders@emesystems.com
fax: (510) 848-5748
voice: (510) 848-5725
 
credit cards accepted

Back to Product Index

 
 

Manufacturer Code

Description

Price ($US)

Light Sensors and Amplifiers

-

Light Sensors

-
LI-190SZ
quantum PAR sensor;
10' cable, ends stripped and tinned
$460
LI-190SA
quantum PAR sensor;
10' cable, BNC termination
$475
LI-200SZ
pyranometer for wide band energy and heat load; 10' cable, ends stripped and tinned
$250
LI-200SA
pyranometer for wide band energy and heat load; 10' cable, BNC termination
$265
LI-200SZ-50
pyranometer for wide band energy and heat load; 50' cable, ends stripped and tinned
$285
LI-200SA-50
pyranometer for wide band energy and heat load; 50' cable, BNC termination
$300

LI-210SA
photometer for human vision; 10' cable, BNC termination
$530
LI-193SA
underwater spherical quantum sensor;
requires 2222UWB underwater cable
$910



LI-COR 2003S
leveling fixture
$65
LI-COR 2222UWB
underwater cable, 3, 10, 30, 50, 100 meters
 call, base price $396

-

Amplifiers

-
UTA
standard UTA with polycarbonate enclosure
$125
/BNC
BNC connector on input
add $10
/xxx
preset input for LIxxx= 190, 200 or 210
no charge
/v
preset output for  1, 2, 5, or 10 Volts
no charge
/gain=x.x
or preset gain factor from UTA chart
no charge
/hobo
preset output range of 2.5 volts for Onset HOBO data logger
no charge
/NE
no enclosure; amplifier electronics only
subtract $15
/VR=x.x
 add special voltage regulator (see manual)
 add $10
HOBO VIC
HOBO Voltage input cable for use with UTA/HOBO
$8
-
Example 1:
UTA/200/5..........UTA pre-configured for 0 to 5 volt output from LI200 Pyranometer:
price $125 ea
-
-
Example 2:
UTA/BNC/190/1............UTA pre-configured for 0 to 1 volt output ($125) from an LI190 Quantum PAR sensor with BNC input termination ($10):
price $135 ea.
-
UCLC
standard UCLC with polycarbonate enclosure
$125
/BNC
BNC connector on input
add $10
/xxx
preset input for LIxxx= 190, 200 or 210
no charge
/hg
preset output for high gain (3.5µA fs)
no charge
/NE
no enclosure; amplifier electronics only
subtract $15
-
Example 1:
UCLC/200 ..............UCLC pre-configured for 4-20 ma output from LI200 Pyranometer:
price $125 ea
-
-
Example 2:
UCLC/BNC/190............UCLC pre-configured for 4-20 mA output from an LI190 Quantum PAR sensor ($115) with BNC input ($10):
price $135 ea.
-
USEA
standard USEA with polycarbonate enclosure, grips
$125
/BNC
BNC connector on input
add $10
/gain
preset standard gain x2 to x1500 from chart
no charge
/VR=x.x
special voltage regulator (see manual)
add $10
/hobo
special for use with Onset HOBO data logger, 2.5 V power
no charge
/offset
offset adjustment, set to a millivolt level
add $20
/NE
no enclosure
subtract $15
-
Example 1:
USEA/200................USEA ($115) preset for x200 gain: price $125 ea.
-
-
Example 2: USEA/BNC/gain=40/offset=15mV...........USEA ($125) with BNC input connector ($10), preset for  x40 gain, and a 15 millivolt offset ($20):
price $140 ea.
-

Temperature, Humidity, Moisture Sensors

-

Temperature Probes

-
TF/10
Fahrenheit output, 10 foot cable
$75
TF/30
Fahrenheit output, 30 foot cable
$85

SHT75PG

 digital RH/°C in PG7 gland

$95
SHT75PGP/3
 digital RH/°C  probe with 3m cable
 $125
SHT15DV
 digital RH/°C for mounting in Davis 7714 radiation shelter.
$95

LWET
standard LWET, 10' cable
$85
/P
painted
no charge

-

Irrometer® Tensiometers and Accessories

-
IRSU-93/xxxLT
ceramic tip tensiometers, length 6" to 48"
call
RSU-93
4-20 mA replacement transducer
220.00
I1001
service kit
40.00
Ist12
stoppers
7.00 (per dozen)
ILTR
LT (Low Tension) tip
18.00
I200SS-5
watermark™ sensor, 5 feet cable
35.00
-
SMX Modules
-
SMX-oem
 OEM moisture transmitter for Watermark sensors, unencapsulated
 24.00
SMX
encapsulated (weatherproof) SMX
60.00

 OWL2pe

-

data logger

-
OWL2pe oem
 OWL2pe core module, v1.6
 $175
TB1048
 Breakout terminal board for the OWL2pe,  48 Phoenix screw-down connection terminals, includes solar battery charger, 5 independent counter channels, and input protection.
 $150
TB1032
Breakout terminal board for the OWL2pe,  32 Phoenix screw-down connection terminals,  input protection. 
$80
SP1210
Solar panel with mounting bracket
10watt, Pmax 17.5V @ 600mA, 12" x 14"
$180


STACHE Microprogrammer for BASIC Stam
STACHE
Microprogrammer for the Parallax Basic Stamp® II with firmware version 1.7b

Other Accessories

-

Batteries & Chargers

-
B1207 12 volt, 7 amp-hour gel cell battery $35
CG1129
12V solar float charger for 1-7aH SLA battery
$85

-

Solar Panels

-
SP1205
Solar panel with mounting bracket
5 watt, Pmax 17.5V  @ 280mA, 8" x 11"
$120
SP1210
Solar panel with mounting bracket
10watt, Pmax 17.5V @ 600mA, 12" x 14"
$180

STACHE microprogrammer
STACHE field programmer for the Parallax Basic Stamp® II, firmware version 1.7b $99

DAVIS INSTRUMENTS

-

Anemometers

-
DV6410
Vantage Pro II anemometer
mounts on the side of the mast support
$155
DV7903L
replacement wind cups, large size
$15
DV7903S
replacement wind cups, small size
$15

-

Rain Gages

-
D7852
DV7852M
Rain Collector II, user selectable scale:
standard inch, 0.01 in. per tip
or metric, 0.2 mm per tip
$95

-

Radiation Shields

-
DV7714
passive radiation shield
$85
/A
 assembled
 add $15

------ Link to Davis Instruments page ----

Bat-Hat system and accessories


Microphone protection system


Bat-Hat bat-hat with preamp, shroud, bracket #1a, 1b or 1c, and reflector. (Cable cost is separate, see below.)
 285.00
/m
 meters, Canare 4E5AT Star Quad audio cable,
$2.50 per meter
/c/m
 meters, 4E5C Star Quad audio cable (stranded braid shielding for electically noisy locations)
$3.25 per meter
/b1a or /b1b or /btm
 standard one-piece bracket (see diagrams)
 choose option
/b3b
 two piece bracket with extra support leg
  add $7

Bat-Hat Accessories
EFG1008BH
 Fiberglass NEMA4 Enclosure 8"x10"x4", with SS hinge and hasp, prepared for Anabat(s), battery and charger.
 $235
B1207
 Sealed Pb-acid battery, 12 Volt, 7 Ah
 $35
CG1129BH
 Battery charger for solar to 12 V sealed Pb-acid battery and wiring harness for Anabat
 $85
AE1205
Solar panel with mounting bracket
5 watt, Pmax 17.5V  @ 280mA, 8" x 11"
$120
AE1210 (recommended)
Solar panel with mounting bracket
10watt, Pmax 17.5V @ 600mA, 12" x 14"
$180

replacement parts

reflector with SS hardware
 $14

Aluminum bracket, styles 1a, 1b, or 1c
 $23

Aluminum bracket style 3b
 $30

Shroud coupler with hardware
 $14
 

 <products index> <home> <top> logo <mail to: info@emesystems.com>